This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
I have the impression that the great CEO doesn't think it's necessary to speak out here at all. He doesn't bother with the customers as long as they pay diligently.
Apparently there is no such thing as “the customer is king” at Fanatec. Actually, it's a shame :-(
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
Oké the update becomes nest week. But how much sure is it that the problems with connection failures are gone? It is really a disaster to race right Now😡
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
it would be interesting to organize all the dissatisfied users of FanaSCAM, go to Germany, and see what the big arrogant CEO would say to all those who are so disappointed and angry.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
Good morning!!. Is there a date (more or less) for the release of the v457 driver?? I would like to try before opening RMA and having to send the base. Thank you!!
It would be interesting if in my opinion all those who had problems returned defective products.
So yes, I am convinced that fanatec would give more resources to programmers and less to advertising.
No answer is reassuring and always maybe yes maybe drive 457 or maybe 458,459 and etc.
These answers are not a solution, I have to be sure to update my products, I can't do a wheel of fortune.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
I have the impression that the great CEO doesn't think it's necessary to speak out here at all. He doesn't bother with the customers as long as they pay diligently.
Apparently there is no such thing as “the customer is king” at Fanatec. Actually, it's a shame :-(
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
it would be interesting to organize all the dissatisfied users of FanaSCAM, go to Germany, and see what the big arrogant CEO would say to all those who are so disappointed and angry.
It would be interesting if in my opinion all those who had problems returned defective products.
So yes, I am convinced that fanatec would give more resources to programmers and less to advertising.
No answer is reassuring and always maybe yes maybe drive 457 or maybe 458,459 and etc.
These answers are not a solution, I have to be sure to update my products, I can't do a wheel of fortune.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
DD2 with Formula V2 XBOX wheel on 456 and importantly base firmware 3.0.4.4 has fixed not being able to select XBOX that I had in 455 / 3.0.4.3.
Cheers,
David
same issue here with ps4 dd1+ ClubSport Steering Wheel Formula V2 . is there a workaround for this? downgrade option? manual install of an older version?
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
same issue here with ps4 dd1+ ClubSport Steering Wheel Formula V2 . is there a workaround for this? downgrade option? manual install of an older version?
The Xbox issue is fixed with the new firmware included in driver 456, so just update.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
The Xbox issue is fixed with the new firmware included in driver 456, so just update.
i am not home but i am pretty sure that i have installed the newest version last saturday. and 456 was the newest version at that date.
it is the same issue that Frenz Isebähner — Fanatec Forum has. i can switch from pc to ps, but then something crashes and the wheel is frozen, no inputs possible. i had to cut off power to start wheel/base in pc mode again.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
Do you now if 457 will include the ability to manually flash HEX files (for the McLaren V2) rather than just EFF files? I have a McLaren wheel that was DOA, as the software won't see any firmware on it whatsoever, it can't auto-flash the firmware because "file not found", and the HEX file won't work because the updater insists it needs an EFF file.
Hello ,same Problem like Frenz Isebähner the DD1 goes to the PS 4 Mode and then nothing more .Are all DD1 broken now or is that a Software Problem.What is happend Fanatec ? We spend a lot of Money for your Products and cant Play !!!.Please resolve your issues.Thanks in Advance.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
Hello ,same Problem like Frenz Isebähner the DD1 goes to the PS 4 Mode and then nothing more .Are all DD1 broken now or is that a Software Problem.What is happend Fanatec ? We spend a lot of Money for your Products and cant Play !!!.Please resolve your issues.Thanks in Advance.
That's a known Firmware issue to be fixed with one of the next firmware releases.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
Haha, that happens when you mix English and German and then feed it into a translator. The German word "Mode" translated to English is "Fashion". But Germans often use the English word "mode" in the same way it's used in English, but then it's pronounced differently.
When I first got the wheel, it originally had the issue where the steering wheel would not register. After redownloading all the drivers multiple times it finally worked. It was fine for a while until 2 days ago when my wheel went back to the issue of not detecting the steering wheel. I had driver 455, found 456 and updated it and instantly fixed my problem….. for 30 minutes until my wheel disconnected mid race and the issue came back. The only way to get my wheel to reconnect is to update my quick release and after a couple times it comes back for 10-15 minutes before it disconnects again. No clue whether it’s a software issue at this point.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
When I first got the wheel, it originally had the issue where the steering wheel would not register. After redownloading all the drivers multiple times it finally worked. It was fine for a while until 2 days ago when my wheel went back to the issue of not detecting the steering wheel. I had driver 455, found 456 and updated it and instantly fixed my problem….. for 30 minutes until my wheel disconnected mid race and the issue came back. The only way to get my wheel to reconnect is to update my quick release and after a couple times it comes back for 10-15 minutes before it disconnects again. No clue whether it’s a software issue at this point.
Clubsport DD+
F1 Esports V2 steering wheel
QR2 pro
CSL pedals with load cell
If you read back you can see that this is a known FW issue and will be fixed in 457. You can downgrade the base firmware to 455 and it will be better.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
That's a known Firmware issue to be fixed with one of the next firmware releases.
It will not be fixed for me as the DD1 won't boot anymore even in bootloader, and is not anymore detected via USB, just fans at 100% when pushing power button
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
It will not be fixed for me as the DD1 won't boot anymore even in bootloader, and is not anymore detected via USB, just fans at 100% when pushing power button
Correct, wont be fixed for you with this issue, you need to contact the support.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
It will not be fixed for me as the DD1 won't boot anymore even in bootloader, and is not anymore detected via USB, just fans at 100% when pushing power button
have you tried to turn on the base on another PC (laptop) and see if it is still dead then?
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
Sorry, I meant the driver package. For example, the latest out now is 456.
Since you're on PS5, drivers don't matter. As for the firmware they come with, the only reason ever upgrade is if you're having issues or if you're unlocking some feature you don't already have.
For you, what you have works. I agree that it would be a bad idea to change that.
Comments
It would be interesting if in my opinion all those who had problems returned defective products.
So yes, I am convinced that fanatec would give more resources to programmers and less to advertising.
No answer is reassuring and always maybe yes maybe drive 457 or maybe 458,459 and etc.
These answers are not a solution, I have to be sure to update my products, I can't do a wheel of fortune.
Thank you
It would be interesting if in my opinion all those who had problems returned defective products.
So yes, I am convinced that fanatec would give more resources to programmers and less to advertising.
No answer is reassuring and always maybe yes maybe drive 457 or maybe 458,459 and etc.
These answers are not a solution, I have to be sure to update my products, I can't do a wheel of fortune.
Thank you
What is fashion?
😡🤬😡
Mode...PS4 - PC - XBOX
What?!
Ich kann ab heute nicht mehr am Lenkrad den Mode umschalten ( PS5 / PS4 - PC - XBOX ).
Ausschalten lässt sich die DD1 PS4 auch nicht mehr. 😡
Then it sounds like its broken and you should contact the support.
same issue here with ps4 dd1+ ClubSport Steering Wheel Formula V2 . is there a workaround for this? downgrade option? manual install of an older version?
The Xbox issue is fixed with the new firmware included in driver 456, so just update.
i am not home but i am pretty sure that i have installed the newest version last saturday. and 456 was the newest version at that date.
it is the same issue that Frenz Isebähner — Fanatec Forum has. i can switch from pc to ps, but then something crashes and the wheel is frozen, no inputs possible. i had to cut off power to start wheel/base in pc mode again.
You can't return a product if they never get back to you with an RMA or refund.
Do you now if 457 will include the ability to manually flash HEX files (for the McLaren V2) rather than just EFF files? I have a McLaren wheel that was DOA, as the software won't see any firmware on it whatsoever, it can't auto-flash the firmware because "file not found", and the HEX file won't work because the updater insists it needs an EFF file.
Hello ,same Problem like Frenz Isebähner the DD1 goes to the PS 4 Mode and then nothing more .Are all DD1 broken now or is that a Software Problem.What is happend Fanatec ? We spend a lot of Money for your Products and cant Play !!!.Please resolve your issues.Thanks in Advance.
That's a known Firmware issue to be fixed with one of the next firmware releases.
Haha, that happens when you mix English and German and then feed it into a translator. The German word "Mode" translated to English is "Fashion". But Germans often use the English word "mode" in the same way it's used in English, but then it's pronounced differently.
Anyway, looking forward to 457.
When I first got the wheel, it originally had the issue where the steering wheel would not register. After redownloading all the drivers multiple times it finally worked. It was fine for a while until 2 days ago when my wheel went back to the issue of not detecting the steering wheel. I had driver 455, found 456 and updated it and instantly fixed my problem….. for 30 minutes until my wheel disconnected mid race and the issue came back. The only way to get my wheel to reconnect is to update my quick release and after a couple times it comes back for 10-15 minutes before it disconnects again. No clue whether it’s a software issue at this point.
Clubsport DD+
F1 Esports V2 steering wheel
QR2 pro
CSL pedals with load cell
If you read back you can see that this is a known FW issue and will be fixed in 457. You can downgrade the base firmware to 455 and it will be better.
It will not be fixed for me as the DD1 won't boot anymore even in bootloader, and is not anymore detected via USB, just fans at 100% when pushing power button
Correct, wont be fixed for you with this issue, you need to contact the support.
here the support, which is almost non-existent, is getting worse and worse
FanaSCAM rules
🙈🙉🙊
have you tried to turn on the base on another PC (laptop) and see if it is still dead then?
No support yet 😡
Gold rule: if works don't upgrade, Never...
For all thing 😅
DD1 on PS5...running firmware 447....i'm never upgrading to new firmware...NEVER!
It runs flawlessly, amazing piece of kit...on firmware 447
Yes also tried on different computer… no success at all, nothing recognized in USB, just fans at 100% until I release power button.
no bootloader mode also
What in the world is "Firmware 447"? Are you talking about the driver version 447? Or the firmware for the wheel? Or the DD1 wheelbase? Or for the QR?
Sorry, I meant the driver package. For example, the latest out now is 456.
Since you're on PS5, drivers don't matter. As for the firmware they come with, the only reason ever upgrade is if you're having issues or if you're unlocking some feature you don't already have.
For you, what you have works. I agree that it would be a bad idea to change that.