Since i can´t find anyone having the same Rig and problem as me, I´ll try my luck here:
I still have the csw 2.5 wheelbase and the formula 2.5 wheel connected to it (QR1 as i cant upgrade on taht WB).
The Wheel has already been repleace by fanatec due to the firmware update loop i had before with the wheel but it still shows as FW0 (which seems to be a known issue since driver 455?!)
The bigger issue for me is that i suddenly loose FFB and i cant shift anymore mid race - randomly - and regain it slowly back after a few seconds, since i still can steer during that i think its the wheel.
I already downgraded to 455, was on 464 before and it doesn´t change, sadly im not sure if this is conencted to the Update Loop error i have with the wheel.
I googled so much and found literally nothing that comes close to my situation so i hope someone can help me here.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
Since i can´t find anyone having the same Rig and problem as me, I´ll try my luck here:
I still have the csw 2.5 wheelbase and the formula 2.5 wheel connected to it (QR1 as i cant upgrade on taht WB).
The Wheel has already been repleace by fanatec due to the firmware update loop i had before with the wheel but it still shows as FW0 (which seems to be a known issue since driver 455?!)
The bigger issue for me is that i suddenly loose FFB and i cant shift anymore mid race - randomly - and regain it slowly back after a few seconds, since i still can steer during that i think its the wheel.
I already downgraded to 455, was on 464 before and it doesn´t change, sadly im not sure if this is conencted to the Update Loop error i have with the wheel.
I googled so much and found literally nothing that comes close to my situation so i hope someone can help me here.
This is a wheel rim firmware issue I think. Disable the vibration motors in the Control Panel and see if it fixes the issue.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
Since i can´t find anyone having the same Rig and problem as me, I´ll try my luck here:
I still have the csw 2.5 wheelbase and the formula 2.5 wheel connected to it (QR1 as i cant upgrade on taht WB).
The Wheel has already been repleace by fanatec due to the firmware update loop i had before with the wheel but it still shows as FW0 (which seems to be a known issue since driver 455?!)
The bigger issue for me is that i suddenly loose FFB and i cant shift anymore mid race - randomly - and regain it slowly back after a few seconds, since i still can steer during that i think its the wheel.
I already downgraded to 455, was on 464 before and it doesn´t change, sadly im not sure if this is conencted to the Update Loop error i have with the wheel.
I googled so much and found literally nothing that comes close to my situation so i hope someone can help me here.
Downgrading the driver to 455 isn't enough. You need to downgrade the firmware too.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
Civilized and constructive feedback and discussions to help each other.
No offending each other!
If you report a driver or firmware issue, please make cross checks:
Update driver and FW separately to isolate an issue and find out if caused by driver OR firmware.
Which driver OR firmware shows the issue
Which driver OR firmware does not show the issue
Check if you can reproduce the issue again if you go back to the version which seems to have caused the issue
Check if the issue is related to specific settings of for example the tuning menu. Is it happening more or less with a specific setting raised or lowered?
Post the answers gathered from the questions above + a short description of the issue including the following info:
Wheel Base Model (product ID): ...
Steering Wheel Model (product ID): ....
Driver Version: ....
Base FW Version: ....
Motor FW Version: ....
Wheel FW Version: ....
FanaLab Version: ....
Tuning Menu settings
Driver/FanaLab installed on C: drive or else?
With driver related issues collect log files and zip them from C:\Users\Public\Fanatec Logs
Changelog of driver 464 (since 463)
Firmware versions included
Podium DD1 / DD2 Base: 3.3.0.1 (NEW)
Podium DD1 / DD2 Motor: 3.0.0.2
Podium DD1 / DD2 WQR: 7
ClubSport DD(+) Base: 2.3.0.1 (NEW)
ClubSport DD(+) WQR: 1.1.0.3
CSL DD / GT DD Pro Base: 1.3.0.1 (NEW)
CSL DD / GT DD Pro Motor: 1.0.3.2
CSL DD / GT DD Pro WQR: 6.0.1.1
CSW V1 Base: 693
CSW V2 Base: 693
CSW V2.5 Base: 693
CSL Elite Base: 693
CSL Elite Base PS4: 693
CSL / CSW Motor: 22
Podium Bentley GT3 Wheel: 1.0.7.0
Podium Bentley GT3 Video: 1.0.2.0
Podium BMW M4 GT3: 9
Podium Hub: 6
Podium BME: 24
Podium BMR: 1.0.0.6
CS SW Formula V2(X), V2.5(X): 47 / 1.0.2.0
CS SW RS: 4
CS SW BMW V2: 3
CS SW F1 Esports V2: 5
CS UH V2 / UHX V2: 2
GT DD Extreme SW: 1.0.7.0
GT DD Pro SW: 8 / 1.0.1.0
CSL Elite SW McLaren GT3: 37
CSL Elite SW McLaren GT3 V2: 47
CSL Elite SW WRC: 4
CSL UH, CSL UH V2: 8
CS P V3: 1.35
CSL Elite Pedals V2: 1.6
CSL Elite Pedals Load Cell Kit: 1.13
CSL Pedals Load Cell Kit: 1.8
CS USB Adapter - Handbrake: 1.10
CS USB Adapter - Shifter: 1.12
CS USB Adapter - CSL Pedals: 1.1
CS USB Adapter - CSL Elite Pedals: 0.1
ClubSport Handbrake V2 (incl. V1/V1.5)
Fixed flickering of handbrake input on CS DD(+)
Improved automatic calibration of handbrake input
Fixed a sometimes incorrect scaling of handbrake input when setting a maximum value manually
Fixed losing manual handbrake calibration over time
New CS HB V2 Picture available when connected via USB
Known Issues
We are aware of missed shifts and button inputs on the P DDs and are investigating
When updating the CS DD base firmware, the wheel might not be detected until performing a restart. This is explained in a pop-up during the update procedure.
When entering a game menu while driving it can happen in some games that the FFB effect doesn't get canceled which results in the wheel turning to one side. (this got now fixed for the Podium DD but can still happen on the CSL DD. We will apply the fix for the CSL DD as well)
Natural friction can start to feel weird after some time of driving. In case you experience issues with NFR, we suggest to turn it OFF for now. (this got now fixed for the Podium DD but can still happen on the CSL DD. We will apply the fix for the CSL DD as well)
Even though the steering input jump which can result in a FFB jolt improved and happens less often, we still reports of the issue and want to investigate for further improvements
Hello, yesterday my fanatec CSL DD QR2 was updated and after the update the steering wheel always turns to the right. Saturation in WRC at 100%. Please help.
ich bin ganz neu im Simracing und ich habe vor ca. 2 Wochen mein Equipment von Fanatec bekommen. CLS DD (8NM) + Clubsport v2.5x + Padel v3. Ich spiele ausschliesslich F1 24, bis jetzt. Ich fahre auf einem Gaming Laptop Acer Nitro 5 (Ryzen 7 5800h + 16 GB RAM + Nvidia Geforce rtx 3070 (8gb).
Ich habe exakt die gleichen Probleme mit dem Schalten, wie sie hier schon angesprochen wurden. Ich habe nach der ersten Installation und den ersten Fahrten gleich ein support Ticket auf gemacht und jetzt nach 2 Wochen ein RMA bekommen. Wenn ich das aber richtig verstehe, handelt es sich um ein bekanntes Firmware Problem? Was würde dann eine Rücksendung bewirken?
Was mir aufgefallen ist. Wenn ich in F1 24 Time Trail fahre und sonst niemand auf der Strecke ist, passieren die Schaltaussetzter fast immer vor den gleichen Kurven der Strecke. Kann es sein, das die Rechnerleistung doch nicht ausreicht und an Stellen der Strecke wo mehr Grafik gefordert ist einfach die Signale nicht schnell genug im Game ankommen? Ich habe massig Videos gesehen. Wenn ich sehe in welcher Geschwindigkeit da runter geschaltet wird. Da kann ich nur von Träumen 😒 Wenn ich die Schaltwippe 3 mal richtig schnell betätige, kommt im Spiel meist nur ein Schaltvorgang dabei raus.
Wäre es möglich, dass obwohl die min. Hardware Voraussetzungen erfüllt sind, die Schaltprobleme durch den Rechner ausgelöst werden?
Hello, yesterday my fanatec CSL DD QR2 was updated and after the update the steering wheel always turns to the right. Saturation in WRC at 100%. Please help.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
I cant upgrade firmware from this driver, I tried from 463 and the same issue as 464 - stuck on older beta firmware for the wheel and the QR2 is reporting 0.0.0.0. firmware - please help.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
ich bin ganz neu im Simracing und ich habe vor ca. 2 Wochen mein Equipment von Fanatec bekommen. CLS DD (8NM) + Clubsport v2.5x + Padel v3. Ich spiele ausschliesslich F1 24, bis jetzt. Ich fahre auf einem Gaming Laptop Acer Nitro 5 (Ryzen 7 5800h + 16 GB RAM + Nvidia Geforce rtx 3070 (8gb).
Ich habe exakt die gleichen Probleme mit dem Schalten, wie sie hier schon angesprochen wurden. Ich habe nach der ersten Installation und den ersten Fahrten gleich ein support Ticket auf gemacht und jetzt nach 2 Wochen ein RMA bekommen. Wenn ich das aber richtig verstehe, handelt es sich um ein bekanntes Firmware Problem? Was würde dann eine Rücksendung bewirken?
Was mir aufgefallen ist. Wenn ich in F1 24 Time Trail fahre und sonst niemand auf der Strecke ist, passieren die Schaltaussetzter fast immer vor den gleichen Kurven der Strecke. Kann es sein, das die Rechnerleistung doch nicht ausreicht und an Stellen der Strecke wo mehr Grafik gefordert ist einfach die Signale nicht schnell genug im Game ankommen? Ich habe massig Videos gesehen. Wenn ich sehe in welcher Geschwindigkeit da runter geschaltet wird. Da kann ich nur von Träumen 😒 Wenn ich die Schaltwippe 3 mal richtig schnell betätige, kommt im Spiel meist nur ein Schaltvorgang dabei raus.
Wäre es möglich, dass obwohl die min. Hardware Voraussetzungen erfüllt sind, die Schaltprobleme durch den Rechner ausgelöst werden?
Grüße Marcus
Es ist definitiv ein Firmware Problem, ein RMA wird nichts bewirken. Der Support ist unfähig.
Lade den Treiber in der Version 455 herunter, und downgrade dann die Firmware auf 0.3.5.0, dann ist das Problem weg.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
Es ist definitiv ein Firmware Problem, ein RMA wird nichts bewirken. Der Support ist unfähig.
Lade den Treiber in der Version 455 herunter, und downgrade dann die Firmware auf 0.3.5.0, dann ist das Problem weg.
Kunden haben seit JAHREN Probleme mit den Treibern sowie der Firmware und jedesmal heisst es, Fehler sei bekannt und wird in Zukunft gefixed. 2024 hieß es großmäulig es werde jeden Monat ein Release avisiert. Tja, es ist 2025 und die Probleme bestehen nach wie vor, von monatlichen releases keine Spur.
Ende 2024 wieder eine dieser Behauptungen im Dezember 24 was zu releasen, aber spätestens Anfang dann 25 - versprochen. Nix passiert.
Im März 25 heisst es nun "Ostern", in einer "ersten Schritt" Variante und im Sommer dann der nächste, um im Herbst dann wieder irgendwas ..
Wer soll den Stuss eigentlich noch glauben?
Und bevor hier wieder der Pfosten auf englisch pocht: Lick my salty vanilla balls!
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
Marcel Pfister and Maurice Boschen I made the update 464 and during the update I had a bug which made an error with the update of my clubsport hub xbox v2 and since I cannot more update it, because it marks to me error firmware file not found, I tried in manual and automatic on several driver of the 455 to the 464 and I do not manage to update it, that displays to me well but with an update which displays the number zero (I put you the captures of screens).
I've tried on several usb ports on my pc and with the original usb cable supplied with the base without a multi-socket and the base is connected directly to the mains without using a multi-socket and each time I get this error telling me that it can't find the corresponding update file.
So I'd like to have the clubsport hub xbox v2 update file, because I know it's possible to have the files separately and go and get them by going through the fanatec update software on my pc to install them manually with the three dots tab that opens the folders on our pc.
Knowing that I've already seen on your forum that there was a file for the QR, but also one for the podium hub and the clubsport DD+ base, I imagine that it's possible to have a file for the clubsport hub xbox v2 that you can give me so that I can do the manipulation?
Marcel Pfister and Maurice Boschen I made the update 464 and during the update I had a bug which made an error with the update of my clubsport hub xbox v2 and since I cannot more update it, because it marks to me error firmware file not found, I tried in manual and automatic on several driver of the 455 to the 464 and I do not manage to update it, that displays to me well but with an update which displays the number zero (I put you the captures of screens).
I've tried on several usb ports on my pc and with the original usb cable supplied with the base without a multi-socket and the base is connected directly to the mains without using a multi-socket and each time I get this error telling me that it can't find the corresponding update file.
So I'd like to have the clubsport hub xbox v2 update file, because I know it's possible to have the files separately and go and get them by going through the fanatec update software on my pc to install them manually with the three dots tab that opens the folders on our pc.
Knowing that I've already seen on your forum that there was a file for the QR, but also one for the podium hub and the clubsport DD+ base, I imagine that it's possible to have a file for the clubsport hub xbox v2 that you can give me so that I can do the manipulation?
On 464, all drivers up to date, can anyone even tell me what this PDD Quick Release is, hardware or software problem, I managed to get an older firmware on eventually 365 I think, fan started spinning constantly, no wheel recognized, but as soon as I update to 464 again, the misery starts, not much to find searching here or on Google. Copy and paste from the hardware thread.
Hoping someone can help, DD1 last night, playing iRacing, done a few laps, came into the pits to change setup, and noticed my wheel was unresponsive.
Then i Noticed the pop up below, from the Fanatec Firmware Updater, my wheelbase and wheel are not recognized by any software, Fanalabs or Fanatec control panel.
Done the power on power off dance multiple times (wheelbase starts, Fanatec message on the LCD and wheel turns), reboot computer etc., can't do a firmware reload or roll back as the base is not found, was on the latest driver since release, no problems at all until this.
Anyone seen this before or possibly has a fix? I didnt initiate any update at all, like i said, i was in game at that moment.
I am the owner of a CSL DD 8nm year 2021 and Formula v2.5x and I recently acquired the QR2 so as to update the connection, initially I had the 464 driver and related firmware, then reading in the various forums I downgraded the firmware with the 355 driver, I was wondering, then do I leave the 355 driver installed or can I switch to the 464 but without updating the firmware? what should be done?
This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
Comments
Solved my own problem sorry
Since i can´t find anyone having the same Rig and problem as me, I´ll try my luck here:
I still have the csw 2.5 wheelbase and the formula 2.5 wheel connected to it (QR1 as i cant upgrade on taht WB).
The Wheel has already been repleace by fanatec due to the firmware update loop i had before with the wheel but it still shows as FW0 (which seems to be a known issue since driver 455?!)
The bigger issue for me is that i suddenly loose FFB and i cant shift anymore mid race - randomly - and regain it slowly back after a few seconds, since i still can steer during that i think its the wheel.
I already downgraded to 455, was on 464 before and it doesn´t change, sadly im not sure if this is conencted to the Update Loop error i have with the wheel.
I googled so much and found literally nothing that comes close to my situation so i hope someone can help me here.
This is a wheel rim firmware issue I think. Disable the vibration motors in the Control Panel and see if it fixes the issue.
Downgrading the driver to 455 isn't enough. You need to downgrade the firmware too.
Like the vibration from the wheel itself?
I tried that as well by falshign the firmware again with 455 but neither did work i even tried manual fw update if i did it right
(Started firmware updater with 455 driver selected manual and just went with teh .\default or did i do sth wrong?)
Since i cant see the right FW i dont know which one im on
Yeah, Vibration on the wheel rim tab. Dunno about the firmware downgrade, never had to do that. But I think the manual covers it.
I just ckecked it and it was already off as the CSW 2.5 doesnt seem to support it
Has the shifting issue with Clubsport DD and Clubsport Formula v2.5 been fixed yet? I am still running 455?
It hasn't. And it's not a shifting issue, but general button failure issue (which the shifters are part of obviously).
Weiß man schon wann die neue Software erscheint?
Weil das Schaltproblem nervt ziemlich
The next two drivers wont fix the shifting issues because the devs still were not able to reproduce the issue at all.
There is no ETA for a fix for that particular issue yet but not before summer it seems.
Fanatec Driver 464 - Release Version
Hallo zusammen,
ich bin ganz neu im Simracing und ich habe vor ca. 2 Wochen mein Equipment von Fanatec bekommen. CLS DD (8NM) + Clubsport v2.5x + Padel v3. Ich spiele ausschliesslich F1 24, bis jetzt. Ich fahre auf einem Gaming Laptop Acer Nitro 5 (Ryzen 7 5800h + 16 GB RAM + Nvidia Geforce rtx 3070 (8gb).
Ich habe exakt die gleichen Probleme mit dem Schalten, wie sie hier schon angesprochen wurden. Ich habe nach der ersten Installation und den ersten Fahrten gleich ein support Ticket auf gemacht und jetzt nach 2 Wochen ein RMA bekommen. Wenn ich das aber richtig verstehe, handelt es sich um ein bekanntes Firmware Problem? Was würde dann eine Rücksendung bewirken?
Was mir aufgefallen ist. Wenn ich in F1 24 Time Trail fahre und sonst niemand auf der Strecke ist, passieren die Schaltaussetzter fast immer vor den gleichen Kurven der Strecke. Kann es sein, das die Rechnerleistung doch nicht ausreicht und an Stellen der Strecke wo mehr Grafik gefordert ist einfach die Signale nicht schnell genug im Game ankommen? Ich habe massig Videos gesehen. Wenn ich sehe in welcher Geschwindigkeit da runter geschaltet wird. Da kann ich nur von Träumen 😒 Wenn ich die Schaltwippe 3 mal richtig schnell betätige, kommt im Spiel meist nur ein Schaltvorgang dabei raus.
Wäre es möglich, dass obwohl die min. Hardware Voraussetzungen erfüllt sind, die Schaltprobleme durch den Rechner ausgelöst werden?
Grüße Marcus
Hello, yesterday my fanatec CSL DD QR2 was updated and after the update the steering wheel always turns to the right. Saturation in WRC at 100%. Please help.
You need to backdate the firmware to 454 or 455 either should be fine then update from there. This worked for me.
Es ist definitiv ein Firmware Problem, ein RMA wird nichts bewirken. Der Support ist unfähig.
Lade den Treiber in der Version 455 herunter, und downgrade dann die Firmware auf 0.3.5.0, dann ist das Problem weg.
Kunden haben seit JAHREN Probleme mit den Treibern sowie der Firmware und jedesmal heisst es, Fehler sei bekannt und wird in Zukunft gefixed. 2024 hieß es großmäulig es werde jeden Monat ein Release avisiert. Tja, es ist 2025 und die Probleme bestehen nach wie vor, von monatlichen releases keine Spur.
Ende 2024 wieder eine dieser Behauptungen im Dezember 24 was zu releasen, aber spätestens Anfang dann 25 - versprochen. Nix passiert.
Im März 25 heisst es nun "Ostern", in einer "ersten Schritt" Variante und im Sommer dann der nächste, um im Herbst dann wieder irgendwas ..
Wer soll den Stuss eigentlich noch glauben?
Und bevor hier wieder der Pfosten auf englisch pocht: Lick my salty vanilla balls!
Kann mir einer erklären,wie ich die Firmware zurück downgraden kann?
Mfg Jens
Forum rules are to use english…
Even Fanatec doesn't care anymore, so why would anybody else.
Maurice. thanks for update. Hopefully a fix soon.
Thanks for info
Hey Maurice just downloaded 464 on csl dd my wrc wheel firmware is 0
My mclaren v2 is 47 and working fine...
I've uninstalled and did clean reset, delete, install... can u send me the wrc wheel firmware so I can try manually install wheel firmware pls
Hello @Marcel Pfister and @Maurice Boschen ,
Marcel Pfister and Maurice Boschen I made the update 464 and during the update I had a bug which made an error with the update of my clubsport hub xbox v2 and since I cannot more update it, because it marks to me error firmware file not found, I tried in manual and automatic on several driver of the 455 to the 464 and I do not manage to update it, that displays to me well but with an update which displays the number zero (I put you the captures of screens).
I've tried on several usb ports on my pc and with the original usb cable supplied with the base without a multi-socket and the base is connected directly to the mains without using a multi-socket and each time I get this error telling me that it can't find the corresponding update file.
So I'd like to have the clubsport hub xbox v2 update file, because I know it's possible to have the files separately and go and get them by going through the fanatec update software on my pc to install them manually with the three dots tab that opens the folders on our pc.
Knowing that I've already seen on your forum that there was a file for the QR, but also one for the podium hub and the clubsport DD+ base, I imagine that it's possible to have a file for the clubsport hub xbox v2 that you can give me so that I can do the manipulation?
Thank you
Hello @Marcel Pfister and @Maurice Boschen ,
Marcel Pfister and Maurice Boschen I made the update 464 and during the update I had a bug which made an error with the update of my clubsport hub xbox v2 and since I cannot more update it, because it marks to me error firmware file not found, I tried in manual and automatic on several driver of the 455 to the 464 and I do not manage to update it, that displays to me well but with an update which displays the number zero (I put you the captures of screens).
I've tried on several usb ports on my pc and with the original usb cable supplied with the base without a multi-socket and the base is connected directly to the mains without using a multi-socket and each time I get this error telling me that it can't find the corresponding update file.
So I'd like to have the clubsport hub xbox v2 update file, because I know it's possible to have the files separately and go and get them by going through the fanatec update software on my pc to install them manually with the three dots tab that opens the folders on our pc.
Knowing that I've already seen on your forum that there was a file for the QR, but also one for the podium hub and the clubsport DD+ base, I imagine that it's possible to have a file for the clubsport hub xbox v2 that you can give me so that I can do the manipulation?
Thank you
On 464, all drivers up to date, can anyone even tell me what this PDD Quick Release is, hardware or software problem, I managed to get an older firmware on eventually 365 I think, fan started spinning constantly, no wheel recognized, but as soon as I update to 464 again, the misery starts, not much to find searching here or on Google. Copy and paste from the hardware thread.
Hoping someone can help, DD1 last night, playing iRacing, done a few laps, came into the pits to change setup, and noticed my wheel was unresponsive.
Then i Noticed the pop up below, from the Fanatec Firmware Updater, my wheelbase and wheel are not recognized by any software, Fanalabs or Fanatec control panel.
Done the power on power off dance multiple times (wheelbase starts, Fanatec message on the LCD and wheel turns), reboot computer etc., can't do a firmware reload or roll back as the base is not found, was on the latest driver since release, no problems at all until this.
Anyone seen this before or possibly has a fix? I didnt initiate any update at all, like i said, i was in game at that moment.
thanks in advance,
Chris
Sign In or Register to comment.
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Sign In with Fanatec US Register
Sign In with Fanatec Australia Register
Sign In with Fanatec Japan Register
Sign In with Fanatec Europe Register
Imprint | Privacy Policy | fanatec.com
I am the owner of a CSL DD 8nm year 2021 and Formula v2.5x and I recently acquired the QR2 so as to update the connection, initially I had the 464 driver and related firmware, then reading in the various forums I downgraded the firmware with the 355 driver, I was wondering, then do I leave the 355 driver installed or can I switch to the 464 but without updating the firmware? what should be done?
Is it possible to know whether either of these versions will (finally) bring support for the Xbox SDK?
Would you even believe what ever they say?