Fanatec Driver 462 (prev. Release) for CSL, CS and Podium (all wheels)

1356710

Comments

  • FANATEC..today has the obligation to all its old and new customers.

    Enough with the excuses and the various tomorrow will be a better day, I see the light outside the tunnel....etc...

    FANATEC must give a quick and decisive response..

    WITH CORSAIR'S ENTRY...it's time to provide solutions.

    Stop asking your customers to wait for new software and responses from customer service.

    No more waiting for XBOX SDK, buttons that don't work, steering wheels that disconnect and pedals that aren't read.

    THE CUSTOMER IS NOT BLAME THE COMPANY IS RESPONSIBLE FOR WHAT THEY SELL.

    Once you have paid for a product or service... you FANATEC must provide it regardless of your internal problems..

    CORSAIR today has the obligation to enter decisively not only for the problems but also to update this company with new products that are easy to use and a guarantee for all of its customers.

    ENOUGH WITH THE FANATEC EXCUSES WE WANT SOLUTIONS....

    THANK YOU.

  • How to report issues:

    • No off-topic.
    • Civilized and constructive feedback and discussions to help each other.
    • No offending each other!

    I'm not aiming this at anyone in particular. This isn't the thread to let off steam. All that will happen is this thread will also get locked.

  • edited October 2024

    I tried driver 462.

    I'm using CS DD+ with PBMR via Universal Hub V2 for Xbox on my PC.

    The gear number displayed on the LED is bugged like "0[0".

    After operating for a while, sometimes a different button than the one I pressed will work.

    In Test Drive Unlimited Solar Crown, after there's a bit of large feedback, like when going over a bump, I can't steer.

    Is an arithmetic overflow occurring in the firmware?


    There's no problem when used with CSL DD.

  • This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    The display issue of the BMR on CS DD is known since its release and internally already fixed to be included in a new firmware at some point in the future.

    Regarding disconnections, as all possible firmware root causes for such an issue are solved, it looks like your base has a hardware issue and you should contact the support.

  • This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    bem falado.

  • This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    Thanks for the reply.

    I don't have any disconnection issues with other games such as GT7, F1 22,23,24, FH4,5, LMU, ETS2, etc.

  • This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    Then it could also be a game issue so best to also contact the game developers.

  • This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    Can you check in Fanatec control panel if other buttons freeze if you press them repeatedly with steering wheel firmware 0.3.5.0?

  • My friend is coming soon to update me to 462. Should or do I need to upgrade the wqr too? Sorry I’m new to this.

  • Hi guys. I've just installed the latest driver on my Podium DD1 and I noticed something: when I start the base, the fan goes full speed for 1-2 seconds. I'm not sure if the base did this before, I'm wondering if that's normal. And thanks for the timetable for the SDK, I'm looking forward to it.

  • This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    That can happen from time to time and is known since 2 years but not possible to be reliably reproduced to get fixed so it will most likely stay like this forever.

  • Allan LehtlaAllan Lehtla Member
    edited October 2024

    im assuming this is the automatic fan protection form an engineer who originally design the DD1/DD2

    when something happens then fan starts run

    this is only some guessing how this fan stuff could be made.

    similar but not exactly same method is used also for Servers. when you start server, they start sound like a yetplane because off fans

  • edited October 2024

    Just realized this is not the official public file. When will that be available

    on Fanatec it’s saying my wheel is up to date. New one not there yet

  • edited October 2024
    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    When public testing is done and no new big issues came to light. So 1-2 weeks or so if all goes well.

  • Thanks Maurice. We trying manual one now.

  • Unfortunately we couldn’t manually install 462. After install was hit it just kept freezing wouldn’t go any further.

    I’ll just wait for it he public version.

  • This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    The public version most likely wont be any different to this RC version.

    Sounds like a PC or Windows issue, not an issue with the driver itself.

  • Yes it’s like a windows issue.

  • Allan LehtlaAllan Lehtla Member
    edited October 2024
    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    define freeze, there pop ups the another window what ask you permission to install, if you ignore that then you cant install it

  • Hello.

    I have some issues with Driver 462 in my PC

    1. When I turn on the base, the calibration's pedals is always in "manual", I put it in automatic but when restart automatically returns to manual and the brake is always at 100%.
    2. My CSL Universal Hub 7-seg Display dont work anymore

    Firmware:

    • Wheel base: 1.2.0.9
    • Wheel base motor: 1.0.3.2
    • CSL Universal Hub: 8
    • WirelessQA: 6.0.1.1
    • CSL Pedals Load Cell Kit: 1.8


  • edited October 2024
    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    It’s an old laptop I think that may be the issue. I’ll just wait for the public one to come out as we were able to update other stuff wheel etc ok just not that manual file.

    once we ok that pop up the hour glass comes up then it freezes.

  • This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    check your hdd if its not full.

  • This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    The fact that the steering wheel stops responding in TDU is a fault of the last patch. Just press a button on the steering wheel and it starts working again. It also happens to people with a Moza steering wheel.

  • This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    As I said, the public one is likely the exact same as this RC one and it wont be more automatic than this one...

  • This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    I will be interested to see these videos.🙂

  • Hi all,

    I cant belive, that the GT Extreme Steering Wheel still doesnt work with different wheel bases. I beg you, please add support for this wheel rim for other wheel bases like the DD2 and CSL Elite Wheelbase. Already waiting for way to long.

  • edited October 2024
    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    CSL Elite Wheel Base support for it will extremely likely never happen. The support will likely be limited to other DD Bases at some point in the unforeseen future (definitely not this year).

  • There's a problem with all DD1 firmware from 3.0.4.4 onwards, including 3.1.0.7 that comes with this driver, in that shifting becomes erratic and doesn't always work. Given Octavian's post about it appears this is also true of the CSL DD.

    Reverting to DD1 firmware 3.0.4.3 solves the problem. It's definitely a firmware problem rather than the driver as I'm currently running driver 462 with 3.0.4.3 and shifts are working properly.

    More details here: https://forum.fanatec.com/discussion/27970/podium-dd1-apm-miss-shifts-issue#latest

  • This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    i only hope its not done for purpose. for make look like hardware have a failure

  • edited October 2024
    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    Wtf? Jesus, Allan come on...

This discussion has been closed.