You just use my settings as they are saved in the profile...... When you load the profile, the settings and TM Setup 1 will automatically get loaded, nothing for you to change (only if you are not satisfied with the settings).
You may want to go back and look at what your in before opening your mouth. Your in the most recent fanalab thread and my question was a fanalab question.
Maurice Böschen, could you share something about how you create the car settings, or is that a trade-secret 😉
Currently I am driving GT3 Endurance, so I have checked the settings for those cars to see what separates them. These are the current settings for the GT3 cars:
It's the same, except the new cars have a bit more natural damper, but the max force is the real difference. How do you go about setting that one? is it just the feeling of the strength, or du you just set it as high as possible without clipping or something like that?
Hello Maurice, thank you very much for your arduous and tireless work in providing us with support and hours of enjoyment with our beloved hobby. Friend, I have this doubt, last night I installed the latest version of Fanalab with your respective profiles. I only have a few doubts about AMS2, after following the instructions for installing your profiles:
1) I clarify that I have a DD1 base, for example I try the Metalmoro MRX Duratec P3, I find that the FF force is very low, from 55 I go to 69, (55 x1.25), but even so it is still very weak, not like the previous version I had installed. (In game settings, you reccomend 33, i have to rise it to 50). This is right? Very different to the previous version I had installed.
2) Continuing with the same example I notice that the steering wheel turn sensitivity for this vehicle is very high, it is set to 1080, but I have to set it to 400/420 degrees for it to sit well. In the previous version this did not happen, the car does not turn as it should. Supposedly the setting should be automatic for the correct steering angle for each car, right?
According to your experience, what am I doing wrong? NOTE: I may have outdated firmware on the DD1. I don't do it very often since I live in Argentina and every time I do it I am honestly a little afraid.
Thank you very much for everything. Thank you in advance for your help and effort to the world of simracing.
If I'm using DD Pro 8nm, what should I multiply the 2 numbers in the title by to get the correct values? I saw some youtube video but he used DD1 as an example and said to multiply by 1.25 iirc.
I use Wheel Base DD2 with Steering Wheel ClubSport Formula V2 and ClubSport pedals.
Since the update V2.01.45 I have the effect in F1 23 that FanaLab simply quits during the game. Zack - gone.
So far I have not been able to recognize a systematic when FanaLab crashes. The functions in the game, including the steering wheel mapping, continue to work. What I really miss are the ITM data.
I 'm having a weird issue with Fanalab and the V3 pedals in EA WRC.
In-game I have set the Brake Pedal Vibration to 0 and have enabled in Fanalab the vibration based on wheel locking. However, the brake pedal vibrates the moment it detects any input and not only on wheel lock. Of course BLI is set to OFF.
On the contrary, the throttle pedal vibration works as it should, e.g. vibrates on wheel slip correctly.
Not sure if is just me, but i think auto load profile in Fabalab is not working anymore in LMU after their last big update. Anyone else is experiencing the same?.
Comments
You just use my settings as they are saved in the profile...... When you load the profile, the settings and TM Setup 1 will automatically get loaded, nothing for you to change (only if you are not satisfied with the settings).
Thx!
?I have a CSL DD and P1 V2 wheel, however Fanalab software identifies my wheel as CSL Elite P1 wheel for PS4. is it OK? Should I worrie about it?
That's normal.
hello is there already fanalab profiel for iracing mclaren 720s ?
Coming when the next FanaLab update drops which supports the car in the CarsList for CDALP. Eventually next week.
okay, thank you :)
Anyone have the LED RPM shift lights worked out for the for iRacing McLaren 720s and the Clubsport Formula v2.5 wheel?
I'm having trouble figuring it out, so if anyone has it sorted and would share I'd truly appreciate it!
😊
FP (G616)
Does anyone know how to use the profiles for each car but use 900 degree rotation and still have the rpm lights work.
load the profile, set SEN to 900, save profile?
Thank you
Why hijack someone else's question instead of starting another??
You may want to go back and look at what your in before opening your mouth. Your in the most recent fanalab thread and my question was a fanalab question.
You quoted my question instead of asking your own in a separate comment!
Whatever dude. I got the answer I was looking for.
Maurice Böschen, could you share something about how you create the car settings, or is that a trade-secret 😉
Currently I am driving GT3 Endurance, so I have checked the settings for those cars to see what separates them. These are the current settings for the GT3 cars:
It's the same, except the new cars have a bit more natural damper, but the max force is the real difference. How do you go about setting that one? is it just the feeling of the strength, or du you just set it as high as possible without clipping or something like that?
Hi, FanaLab isn’t recognising my DD+ but Fanatec control panel is. Also, what’s an easy way to remove all profiles so I can start fresh.
thanks
Hello Maurice, thank you very much for your arduous and tireless work in providing us with support and hours of enjoyment with our beloved hobby. Friend, I have this doubt, last night I installed the latest version of Fanalab with your respective profiles. I only have a few doubts about AMS2, after following the instructions for installing your profiles:
1) I clarify that I have a DD1 base, for example I try the Metalmoro MRX Duratec P3, I find that the FF force is very low, from 55 I go to 69, (55 x1.25), but even so it is still very weak, not like the previous version I had installed. (In game settings, you reccomend 33, i have to rise it to 50). This is right? Very different to the previous version I had installed.
2) Continuing with the same example I notice that the steering wheel turn sensitivity for this vehicle is very high, it is set to 1080, but I have to set it to 400/420 degrees for it to sit well. In the previous version this did not happen, the car does not turn as it should. Supposedly the setting should be automatic for the correct steering angle for each car, right?
According to your experience, what am I doing wrong? NOTE: I may have outdated firmware on the DD1. I don't do it very often since I live in Argentina and every time I do it I am honestly a little afraid.
Thank you very much for everything. Thank you in advance for your help and effort to the world of simracing.
Sorry Maurice, forgot that message. I made a wrong calibration of the wheel in the game. Its a little tricky. Sorry again!
are there new profiles in fanalab for the updated cars in LMU
Not yet as I have some private life as well and cant do profiles in just some minutes. Each profile takes at least an hour of work.
However, no profile release without a new Lab Version which supports the new cars as well.
Tks for all of your time spent for us.
Hi Maurice,
If I'm using DD Pro 8nm, what should I multiply the 2 numbers in the title by to get the correct values? I saw some youtube video but he used DD1 as an example and said to multiply by 1.25 iirc.
Thank you, awsome work!
I use Wheel Base DD2 with Steering Wheel ClubSport Formula V2 and ClubSport pedals.
Since the update V2.01.45 I have the effect in F1 23 that FanaLab simply quits during the game. Zack - gone.
So far I have not been able to recognize a systematic when FanaLab crashes. The functions in the game, including the steering wheel mapping, continue to work. What I really miss are the ITM data.
What can I do?
Greetings
Stefan
Translated with DeepL.com (free version)
Please upload the Log files, otherwise a Crash is not possible to analyze.
I hope that you mean FLControl.log in FanaLabDiag
Greetings
Stefan
Doesnt work like that for a CSL DD. What you saw was for using a DD1 with DD2 profiles
I 'm having a weird issue with Fanalab and the V3 pedals in EA WRC.
In-game I have set the Brake Pedal Vibration to 0 and have enabled in Fanalab the vibration based on wheel locking. However, the brake pedal vibrates the moment it detects any input and not only on wheel lock. Of course BLI is set to OFF.
On the contrary, the throttle pedal vibration works as it should, e.g. vibrates on wheel slip correctly.
Anyone faced a similar issue?
Not sure if is just me, but i think auto load profile in Fabalab is not working anymore in LMU after their last big update. Anyone else is experiencing the same?.
2024 cars / liveries are not implemented in the current public FanaLab Version but will only be supported with the next Lab update.
2023 Season is still fully working.