Apologies if I am missing something here but when I go to load your profiles into fanalab it is saying that the profile conversion failed as the profile is too outdated. If you have any updated files for Iracing would you mind sharing them, please?
The profiles are a great help thanks. One query though, the BMW gt3 shift lights are programmed well above the redline. I also have some strange behaviour where the shiftlights on the pbme randomly flash using this profile.
Do I need to do something to adapt the profiles to the pbme or do I have another issue?
Hi Maurice, thanks for your awesome work. BTW, you don't happen to have also the profiles for CSW 2.5 right? It is basically for the LEDs so I don't have to be just importing the LEDs over to my generic profile and have a one-stop solution to squeeze all the juice of my CSW before I get a DD1/2.
you can choose which settings you want to load from a profile in Fanalab, so you can load a DD1 profile for example, but only load the LED and vibration settings for example.
hi everyone, i have jumped back into assetto corsa recently and was wondering if anyone had created any profiles for the cars? the led mismatch is annoying so was going to fix a few for my go-cars but i thought i'd see if anyone else has done any?
then you did not disabled the native Fanatec LED option in game so you did not cliked on the Enable Telemetry and Enable FanaLab LED Support Buttons in the Game Profile Overview Tab in FanaLab which would show you the exact steps how to disable native LED support.
Did this but no matter which car profile i select from your F1 2020 folder i always have same Red/Blue RPM leds.So iam not sure if u did unique LED profile foe every F1 car or u leave it same for all cars? Picture attached
Yes of course I did a profile for EVERY single car in the game to match the LEDs for each car. When you only ever use the LED profile for the McLaren.. well.. yes of course you only ever get the colors of that profile... There are 26 profilees included in the Download of my F1 2020 pack - one for each car.
I tried more profiles than mclaren and all have red/blue leds in profile.And mclaren have first leds green in game but in profile there is red/blue as u can see on screenshot attached.So i dont know what i did wrong
McLaren does NOT have first LEDs green in game. McLaren has ONLY red and blue.
In Multiplayer, MyTeam and Time Trial only ALL cars have green, red, blue but for these modes I also have made an extra profile as you could see in the profile list.
This is because you are in one of the aforementioned modes (Multiplayer, MyTeam and Time Trial, most likely TIme Trial where EVERY car uses the same basic green/red/blue LED pattern.
In all other modes like Free Practice, championship, career etc the McLaren only has Red and Blue LEDs.
Can you please have a look at your iRacing Supercars Holden ZB Commodore - 48 I 20Nm.pws profile for the DD1 from the FanaLab 1.54 Profiles DD1.
For whatever reason this profile will not import into Fanalb1.5.4.5, have tested with a number of the other profiles and they import perfectly but not the Supercars Holden ZB Commodore.
Thank you in advance for any help
Edit: I was able to fix it by extracting just that file from the 1.54 profiles DD1.rar and overwriting it in the original unzip folder where I store all the profiles and it seems to have fixed the issue. Not sure how it got corrupted but overwriting it has fixed it.
Thank you very much for these. I had a new Formula V2 delivered yesterday and loaded in the profiles for the LED on my CSW 2.5 base....and it has transformed my experience in ACC. Having the wheel LED's match exactly what the car is doing is a game changer for me.
Comments
Does anyone have decent setup for the RUF RT12 Track with a DD2? Or a good car to load a baseline from? Maybe the 911 Cup car?
Thanks!
Also, Maurice, thank you so much for the profiles!
Hi Maurice
Apologies if I am missing something here but when I go to load your profiles into fanalab it is saying that the profile conversion failed as the profile is too outdated. If you have any updated files for Iracing would you mind sharing them, please?
Updated and working profiles for 1.54.5 are somewhere in this thread...
1.54.5?
Yes?😅
Hi Maurice,
The profiles are a great help thanks. One query though, the BMW gt3 shift lights are programmed well above the redline. I also have some strange behaviour where the shiftlights on the pbme randomly flash using this profile.
Do I need to do something to adapt the profiles to the pbme or do I have another issue?
Hi Maurice, thanks for your awesome work. BTW, you don't happen to have also the profiles for CSW 2.5 right? It is basically for the LEDs so I don't have to be just importing the LEDs over to my generic profile and have a one-stop solution to squeeze all the juice of my CSW before I get a DD1/2.
you can choose which settings you want to load from a profile in Fanalab, so you can load a DD1 profile for example, but only load the LED and vibration settings for example.
hi everyone, i have jumped back into assetto corsa recently and was wondering if anyone had created any profiles for the cars? the led mismatch is annoying so was going to fix a few for my go-cars but i thought i'd see if anyone else has done any?
@Maurice Böschen Are there any profiles for CSW V2.5 for ACC?
Hi Chris bartschat did you find any profiles for a csw v2.5 for acc i crtn find any
please read my message to Javier two posts above yours.
Thank you very much. I am just wondering if the FFB is the same as for the DD's?
When using my profiles with anything else than a DD please uncheck the Tuning Menu checkbox so it does not get loaded at all but only the LEDs.
You have to find the FFB by yourself of other bases, sorry.
Hi guys,
I'm currently using the latest version of Fanalab + drivers and I have a Formula V2 + CSL Elite PS4.
Is there any way I can completely turn off the rev leds from the wheel base and keep only the ones from the wheel?
Checking fanalab, I can't see an ON/OFF for the wheel base, only for the steering wheel.
Any help is appreciated.
Thanks.
No that's not possible.
Thanks Maurice.
Hi i downloaded F1 2020 profile but LEDs doesnt match in game LEDs.
You need to disable the in game LEDs and select the correct profile, then it will match for Formula wheels.
Yes i did this but all cars have same blue/red rev lights on my wheel.Formula V2 btw
then you did not disabled the native Fanatec LED option in game so you did not cliked on the Enable Telemetry and Enable FanaLab LED Support Buttons in the Game Profile Overview Tab in FanaLab which would show you the exact steps how to disable native LED support.
Did this but no matter which car profile i select from your F1 2020 folder i always have same Red/Blue RPM leds.So iam not sure if u did unique LED profile foe every F1 car or u leave it same for all cars? Picture attached
Yes of course I did a profile for EVERY single car in the game to match the LEDs for each car. When you only ever use the LED profile for the McLaren.. well.. yes of course you only ever get the colors of that profile... There are 26 profilees included in the Download of my F1 2020 pack - one for each car.
I tried more profiles than mclaren and all have red/blue leds in profile.And mclaren have first leds green in game but in profile there is red/blue as u can see on screenshot attached.So i dont know what i did wrong
McLaren does NOT have first LEDs green in game. McLaren has ONLY red and blue.
In Multiplayer, MyTeam and Time Trial only ALL cars have green, red, blue but for these modes I also have made an extra profile as you could see in the profile list.
Mcl have greens but dont care.Problem solved and this is what confused me.Thanks :)
This is because you are in one of the aforementioned modes (Multiplayer, MyTeam and Time Trial, most likely TIme Trial where EVERY car uses the same basic green/red/blue LED pattern.
In all other modes like Free Practice, championship, career etc the McLaren only has Red and Blue LEDs.
Maurice,
Can you please have a look at your iRacing Supercars Holden ZB Commodore - 48 I 20Nm.pws profile for the DD1 from the FanaLab 1.54 Profiles DD1.
For whatever reason this profile will not import into Fanalb1.5.4.5, have tested with a number of the other profiles and they import perfectly but not the Supercars Holden ZB Commodore.
Thank you in advance for any help
Edit: I was able to fix it by extracting just that file from the 1.54 profiles DD1.rar and overwriting it in the original unzip folder where I store all the profiles and it seems to have fixed the issue. Not sure how it got corrupted but overwriting it has fixed it.
Cheers Al
Thank you very much for these. I had a new Formula V2 delivered yesterday and loaded in the profiles for the LED on my CSW 2.5 base....and it has transformed my experience in ACC. Having the wheel LED's match exactly what the car is doing is a game changer for me.
Thank you, thank you!
@Maurice Böschen Any chance of getting a profile for the DD1 for the new iRacing Mclaren 570s GT4? Appreciate any help
Cheers Al