F1 2019/2020/2021 (PC) - Fanatec Recommended Settings

Dominic BrennanDominic Brennan Member, Administrator
edited August 2021 in F1 20xx
General Notes:
- The settings below are considered to be reasonable baseline values for F1 2019/2020/2021 (PC). They might not suit all tastes and driving styles, but they are a good starting point.

- In order to apply the suggested settings correctly, it is important to assign both the Tuning Menu values AND the suggested In-Game settings together.

- For the Podium Series settings, it is assumed that the Torque Key is being used.

- Increasing the in-game Wheel Damper setting can help to avoid oscillation on straights, at the expense of a 'heavier' wheel that is harder to execute fast corrections. The same applies for lower DRI (drift mode) values on belt-driven wheel bases and higher NDP (Natural Damper) and NFR (Natural Friction) settings on direct drive wheel bases.

- Please ensure you are using the latest firmware for all Fanatec devices.



Podium Wheel Base DD1 / Podium Racing Wheel F1® PS4™

Tuning Menu Settings:
SEN 360
FF 40
FFS Peak
NDP 10
NFR 0
NIN 0
INT 3
FEI 100
FOR 100
SPR 100*
DPR 100*
BLI User Preference
SHO 100
BRF User Preference

*SPR has no effect, DPR is directly associated with the Wheel Damper in-game setting.

In-Game Settings:
Vibration & Force Feedback: On
Vibration & Force Feedback Strength: 65
On Track Effects: 10
Rumblestrip Effects: 25
Off Track Effects: 25
Wheel Damper: 10
Understeer Enhance: Off


Podium Wheel Base DD2

Tuning Menu Settings:
SEN 360
FF 40
FFS Peak
NDP 10
NFR 0
NIN 0
INT 3
FEI 100
FOR 100
SPR 100*
DPR 100*
BLI User Preference
SHO 100
BRF User Preference

In-Game Settings:
Vibration & Force Feedback: On
Vibration & Force Feedback Strength: 65
On Track Effects: 10
Rumblestrip Effects: 25
Off Track Effects: 25
Wheel Damper: 10
Understeer Enhance: Off


ClubSport Wheel Base V2

Tuning Menu Settings:
SEN 360
FF 100
SHO 100
BLI User Preference
DRI 005
FOR 100
SPR 100*
DPR 100*
BRF User Preference

*SPR has no effect, DPR is directly associated with the Wheel Damper in-game setting.

In-Game Settings:
Vibration & Force Feedback: On
Vibration & Force Feedback Strength: 70
On Track Effects: 10
Rumblestrip Effects: 25
Off Track Effects: 25
Wheel Damper: 5
Understeer Enhance: Off


ClubSport Wheel Base V2.5

Tuning Menu Settings:
SEN 360
FF 100
SHO 100
BLI User Preference
DRI -02
FOR 100
SPR 100*
DPR 100*
BRF User Preference
FEI 080

*SPR has no effect, DPR is directly associated with the Wheel Damper in-game setting.

In-Game Settings:
Vibration & Force Feedback: On
Vibration & Force Feedback Strength: 70
On Track Effects: 10
Rumblestrip Effects: 25
Off Track Effects: 25
Wheel Damper: 5
Understeer Enhance: Off


CSL Elite Wheel Base (V1)

Tuning Menu Settings:
SEN 360
FF 100
SHO 100
BLI User Preference
DRI 005
FOR 100
SPR 100*
DPR 100*
BRF User Preference
FEI 100

*SPR has no effect, DPR is directly associated with the Wheel Damper in-game setting.

In-Game Settings:
Vibration & Force Feedback: On
Vibration & Force Feedback Strength: 75
On Track Effects: 10
Rumblestrip Effects: 15
Off Track Effects: 20
Wheel Damper: 5
Understeer Enhance: Off


CSL Elite Wheel Base V1.1 / CSL Elite Wheel Base + / CSL Elite Racing Wheel PS4™

Tuning Menu Settings:
SEN 360
FF 100
SHO 100
BLI User Preference
DRI -03
FOR 100
SPR 100*
DPR 100*
BRF User Preference
FEI 060

*SPR has no effect, DPR is directly associated with the Wheel Damper in-game setting.
In-Game Settings:
Vibration & Force Feedback: On
Vibration & Force Feedback Strength: 75
On Track Effects: 10
Rumblestrip Effects: 15
Off Track Effects: 20
Wheel Damper: 5
Understeer Enhance: Off




CSL DD
(Compatibility Mode)
Tuning Menu Settings:
SEN 360
FF 100
FFS Peak
NDP 25
NFR 0
NIN 0
INT 6
FEI 100
FOR 100
SPR 100*
DPR 100*
BLI User Preference
SHO 100
BRF User Preference

*SPR has no effect, DPR is directly associated with the Wheel Damper in-game setting.

In-Game Settings:
Vibration & Force Feedback: On
Vibration & Force Feedback Strength: 65
On Track Effects: 10
Rumblestrip Effects: 25
Off Track Effects: 25
Wheel Damper: 10
Understeer Enhance: Off






«1

Comments

  • Adam PopovAdam Popov Member
    thank you!
  • 喆 陳喆 陳 Member
    Thank you very much! Very useful.
  • Will SuttonWill Sutton Member
    with the last beta drivers 360 is totally wrong..turn the wheel 15 degrees and in game its nearly half a turn...auto woks so it basically mirrors the on screen ( out a little )
  • Emile FranchittiEmile Franchitti Member

    Does F1 2019 run on a DD2 ?

  • Maurice BöschenMaurice Böschen Member

    Of course.

  • Joshua MondscheinJoshua Mondschein Member

    Are there recommended F1 2019 settings for the new upgraded DD1/DD2 driver package? (V 352)

  • Ryan OsieckiRyan Osiecki Member

    Thank you for posting this. I am running the Clubsport V2.5 wheel with Forza GT Wheel and V3 pedal box. Does anyone have any recommended settings for F1 2019 on Xbox?

    Thank you for you consideration!

  • Ryan OsieckiRyan Osiecki Member
    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
    Ryan Osiecki

    Disregard... reading helps! :)

  • Michael StillmanMichael Stillman Member

    What /where 8s the tuning menus/options??

    Thanks

  • Maurice BöschenMaurice Böschen Member
    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    In the Tuning Menu...?! Please read Quick Guides and Manuals to get started or watch Youtube Tutorials which I think is needed when you dont know how to access Tuning Menu ;-)

  • Rob van EssenRob van Essen Member

    What are the latest and greatest default settings with the latest soft/firmware?

  • Osmindo Augusto MaiaOsmindo Augusto Maia Member
    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    Go to beta drivers...

  • Rob van EssenRob van Essen Member


    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    I have with V365:

    SEN 360, FFB 40, LIN OFF, NDP 50, NFR OFF, NIN OFF, INT 06, FEI 100, FOR 100, SPR 100, DPR 100, BLI 100, SHO 100, MPS AUT, BRF 50.

    In game: V&FF ON, V&FFB 70, OTE 10, RSE 15, OTE 20, WD 0, UE OFF.

    Are these correct ?

  • Ryan MonaghanRyan Monaghan Member

    the SEn on this rim is default "aut" (auto is assume) and goes from 108 to 0..... what ?

  • Maurice BöschenMaurice Böschen Member
    edited May 2020
    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    108=1080. Also I think you are in the wrong thread... ^^

  • Ryan MonaghanRyan Monaghan Member

    for f1 2019?

  • Maurice BöschenMaurice Böschen Member
    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    yes, F1 2019 the game where the recommended setting for SEN is 360, not auto and not 108(0). ^^

  • Ryan MonaghanRyan Monaghan Member

    sorry im new to all this stuff... just got this fanatec stuff yesterday, moving from an old t150. I love this thing, just trying to fiddle with all the controls and settings

  • Ryan MonaghanRyan Monaghan Member

    do you know why the rotary encoder only registers in game in only the counter clockwise direction and not clockwise? im wwanting to map ERS to it

  • Maurice BöschenMaurice Böschen Member
    edited May 2020
    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
    Ryan Monaghan

    Which Driver and Firmware on which base?

  • Ryan MonaghanRyan Monaghan Member

    driver 336 firm656

  • Ryan MonaghanRyan Monaghan Member

    thanks for your feedback

  • Clifford FosterClifford Foster Member
    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.

    You may have to go into game settings and map... Each direction of the encoders are mapped to their own individual "buttons"... I have the right thumb encoder to increase ERS when I flick my thumb up, and decrease ERS when flicking down... Hope that helps

  • Mattias ElmerforsMattias Elmerfors Member 
    hi which ffb should you run on the f1 2020 game are these the ones to use? with ffb 45? is ffb 45 the best ffb?
    Screenshot_20210126-152100_Samsung Internet.jpg 

                            
    
                        
                        
    
                
    
            
    
        
    • 
                
  • 
            
    

                                
    
                                    
    
                                
    
                    
    
            
               Robert ConleyRobert Conley            
            
                 Member             
                    
    
                    
    
            
                           
                                                                    
    
                
    
                
    
                    
    
                        
    
                            
    Can we get an update for this for 2020?  Also, Does anyone run higher throttle or brake saturation, than 0, with CS V 3 pedals?
                            
    
                        
                        
    
                
    
            
    
        
    • 
                
  • 
            
    

                                
    
                                    
    
                                
    
                    
    
            
               Guido GarollaGuido Garolla            
            
                 Member             
                    
    
                    
    
            
                           
                                                                    
    
                
    
                
    
                    
    
                        
    
                            
    Are the suggested options for CSL DD for people with the boost kit? If so, would it be possible to have the suggested settings for the standard PSU kit?
    Thanks!
                            
    
                        
                        
    
                
    
            
    
        
    • 
                
  • 
            
    

                                
    
                                    
    
                                
    
                    
    
            
               Daniel MannbergDaniel Mannberg            
            
                 Member             
                    
    
                    
    
            
                           
                                                                    
    
                
    
                
    
                    
    
                        
    
                            
    anyone with the csl dd (8nm) has some good settings for pc? Struggling especially with how turning feels, sometimes it feels to light and sometimes especially in high speed corners it’s just way to heavy 🤔
                            
    
                        
                        
    
                
    
            
    
        
    • 
                
  • 
            
    

                                
    
                                    
    
                                
    
                    
    
            
               Roberto BrambatiRoberto Brambati            
            
                 Member             
                    
    
                    
    
            
                           
                                                                    
    
                
    
                
    
                    
    
                        
    
                            
    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
    Daniel Mannberg
    after the last update I saw that the compatibility with csl dd has been implemented, does anyone have any news about it or new settings? above I read that they still suggest using compatibility mode.
                            
    
                        
                        
    
                
    
            
    
        
    • 
                
  • 
            
    

                                
    
                                    
    
                                
    
                    
    
            
               Maurice BöschenMaurice Böschen            
            
                 Member             
                    
    
                    
    
            
                           
                                                                    
    
                
    
                
    
                    
    
                        
    
                            
    This is an embed external element. It can be deleted using the delete key or the backspace key. To view the full element, press the preview button below.
    Same settings but now with pc mode...
                            
    
                        
                        
    
                
    
            
    
        
    • 
                
  • 
            
    

                                
    
                                    
    
                                
    
                    
    
            
               Roberto BrambatiRoberto Brambati            
            
                 Member             
                    
    
                    
    
            
                           
                                                                    
    
                
    
                
    
                    
    
                        
    
                            
    ok thank you very much for the answer tonight I try !! ps. the steering saturation in game no one changes it sometimes 360 seems excessive to me Thanks bye
                            
    
                        
                        
    
                
    
            
    
        
    • 
            


                

                    
Sign In or Register to comment.