Needing to set BRF to 100% with BPK on V3's
James Farrelly
Member
in Pedals
I've just set up my V3's using the BPK, and I'm using the PU foam + 2 x Green 13 diameters.
However, I went into the set up and set the min and max for the pedal, but it's WAY too easy for me to hit 100% and I'm locking up all over the place.
The only way I can remedy things is by setting my Brake Force to 100%.
Am I doing something wrong?
Comments
Have you re calibrated the Min /Max points in the Fanatec Driver window? 2 x Green 13 is very stiff so you would reach 100% fairly easy. Try setting Min/Max and see if that helps.
Hey - appreciate you taking the time to reply. I mentioned in my post that I've already tried setting the min and max - which hasn't helped unfortunately.
Have you tried to push 'beyond' the current Max value while clicking the Max button again?
I did try that - no luck.
Make sure to check in-game how the brake sensitivity curve is setup, for example in iRacing by default it is not 1:1 and overly sensitive, you need to put the setting to 0 so you don't apply any factor.
But in general please list which driver and firmware versions you are using so we can give more precise answers regarding if its a known issue of that version for example.
I'm experiencing a similar thing, I'm using the "Medium" BPK bushings and I'm at 90 on Brake Force. Would need to check what firmware I'm on but it's probably 2-3 versions old.