Yes the V3 are compatible with GT6.
Have you also updated the V3 pedals separately ? You can do so by connecting the USB from pedals to a pc, disconnect it from the base, just to be sure. Start the Fanatec program on your pc and click update. Run the update, calibrate the pedals once more and try again if they work with GT6.
Thomas, any update on a PS4 compatible rim? Polyphony Digital is unveiling GT Sport today and I want to be able to use my CSW V2 to play it when it releases. They also may be releasing a beta.
This is going to be a good year... things are heating up for sim racing...hmmm...Rumor has it and there are Pics!!! on ISR that Look to be a DD wheel about to come out for TM... I'm Going to start saving $$$ Now because i know that the Fanatec answer while it may be a little later than some would like I'm sure it will be a Superior Solution and well worth any extra wait time.... I'm going to start saving Now!!!
Wow - just watched the GT Sport trailer and immediately headed here to see if there were any early compatibility discussions. Here's to hoping we hear about support for either the existing wheel adapters, or a new PS4 adapter in time for November!!
hello .. anyone know of some rumors regarding the license with sony ? I and my friends are very interested in buying the csw v2 and expect full compatibility , let me know ?
The CSW v2 is fully compatible. It's just that Fanatec isn't allowed to advertise compatibility anymore, and can only advertise it with a fully-licensed PS4 wheel when they have signed a license agreement.
Everything currently works on PS4 however if you are awaiting news on a PS4 branded wheel than no sorry. Maybe E3 ? Especially now that GT Sport is due in November.
I still have an PS4 and XB1 but for me these consoles along with the policies of Sony and Microsoft are dead! This behaviour together with hardware that sucks in comparison to a PC, not enabling triple screen setups or usefuel (high resolution) VR, endless long loading times etc.
I have noticed that the Universal Hub EU (PC/PlayStation) Version is no longer available to purchase on the product page, I recently bought one (month ago) And didnt get a chance to download the PDF manual,
Would it be possible for someone to please upload it here,
The normal Uni Hub is gone. Because the X1 uni hub is the same, only added some button caps and a X1 chip. I'd go for the BMW rim. I bought a hub because at that time it was the only option available for X1. Still don't like it and buy a BMW X1 look a like rim in a blink if it's ever is gonna be made. I had one and sold it... :$ never should've done that!!
Most important thing of course is that when GT Sport comes, Fanatec wheels has to work with it. I guess Fanatec knows that as well, it would be huge financial loss for them if there isn't GT-support.
This is gonna be a bit of a long post. Hopefully you'll read on.
I'm new to Fanatec. I'm currently a G29 user (former 25 & 27). I
currently run a racing rig on PS3. I'm not an Xbox fan and haven't upgraded to
PS4 because I've spent tons on games and equipment for PS3. 90% of my
gaming is on Racing sims and I currently own the following titles:
All Dirts
F1 2010 to current
All Grids
All WRC's
GT 5 & 6
Test Drive: Ferrari...
A few N4S (not worth mentioning IMO)
Probably a few other titles I'm forgetting
My real love is rallying with a bit of drifting etc from the Grid games.
As mentioned I'm now a G29 user but I'm not as happy as I thought I'd be with
it. So I've decided to give Fanatec a go (hadn't in the past because of the
obvious cost involved!! :-) ).
I wasn't aware of all this Sony compatibility thingy going on but have done a
bit of reading and think I need the following gear for my PS3 setup:
Product Name Model ClubSport Wheel Base V2 Servo AU CSW
B V2 AU
ClubSport Steering Wheel Universal Hub AU CSW
RUH For Rallying & all
games except F1
ClubSport Wheel Rim Drift AU UH RDRIFT For Rallying & all games except F1
ClubSport Steering Wheel Formula Carbon AU CSW
RFORM CAR For F1 games
ClubSport Pedals V3 AUS CSP
V3
ClubSport Handbrake AU CS HB
You'll notice I haven't put a shifter in there as I'm used to using the
paddles.
Is the above gear correct for a PS3 setup (especially the hand brake)? Will it all work for all games that
currently work with a G27/29 wheel?
It's going to cost me $2500 so I want to make sure I'm not buying the wrong stuff, obviously.
If it's all good, will it work with a ps4 if I ever upgrade?
Or are there rumours that Fanatec are bringing something else out and I should
wait? Or is that just for PS4 which I don't really care about atm?
Comments
\m/
I hope That the ps4 flying out as fast as possible .. there a timetable ?Nope...you'll see it announced when it's almost ready for sale over here.
Like Remco said...the V2 and every current wheel work on PS4, but you'll need the controller to navigate in PS dashboard.
Or you might as well get the Universal Hub and attach the wheel you want
Fortunately for me I had just purchased mine 2 weeks ago...
For the manual, there you are, mate
This is gonna be a bit of a long post. Hopefully you'll read on.
I'm new to Fanatec. I'm currently a G29 user (former 25 & 27). I currently run a racing rig on PS3. I'm not an Xbox fan and haven't upgraded to PS4 because I've spent tons on games and equipment for PS3. 90% of my gaming is on Racing sims and I currently own the following titles:
All Dirts
F1 2010 to current
All Grids
All WRC's
GT 5 & 6
Test Drive: Ferrari...
A few N4S (not worth mentioning IMO)
Probably a few other titles I'm forgetting
My real love is rallying with a bit of drifting etc from the Grid games.
As mentioned I'm now a G29 user but I'm not as happy as I thought I'd be with it. So I've decided to give Fanatec a go (hadn't in the past because of the obvious cost involved!! :-) ).
I wasn't aware of all this Sony compatibility thingy going on but have done a bit of reading and think I need the following gear for my PS3 setup:
Product Name Model
ClubSport Wheel Base V2 Servo AU CSW B V2 AU
ClubSport Steering Wheel Universal Hub AU CSW RUH For Rallying & all games except F1
ClubSport Wheel Rim Drift AU UH RDRIFT For Rallying & all games except F1
ClubSport Steering Wheel Formula Carbon AU CSW RFORM CAR For F1 games
ClubSport Pedals V3 AUS CSP V3
ClubSport Handbrake AU CS HB
You'll notice I haven't put a shifter in there as I'm used to using the paddles.
Is the above gear correct for a PS3 setup (especially the hand brake)? Will it all work for all games that currently work with a G27/29 wheel?
It's going to cost me $2500 so I want to make sure I'm not buying the wrong stuff, obviously.
If it's all good, will it work with a ps4 if I ever upgrade?
Or are there rumours that Fanatec are bringing something else out and I should wait? Or is that just for PS4 which I don't really care about atm?
Anything else I've missed would be appreciated.
Cheers
Muzza<!--[if gte mso 9]> <w:LsdException Locked="false" SemiH