I bought a brand new CSW 2.5 and installed the available current driver Fanatec_64-driver_328 from fanatec, and my wheel was shown (2x) as game controller and worked in rfactor2.
But after updating zu Fanatec_64_driver_373, there was a "forced" Hardwareupdate and then it was changed incorrectly?? to FANATEC ClubSport Wheel Base V2 and ist not shown anymore as game controller and not seen or useable in any game.
In hardware and printer i see FANATEC ClubSport Wheel Base V2 but i can nothing do with it.
installed and deinstalled quite and reboot after reebot a lot no success :-(
i use a Universal hub, may be This is the reason for changing to Xbox Mode after flashing and loosing windows compatibility. Seems that i have to Find out how to reactivate the „pc Mode“.
will give it a try...
Didnt expect That. Lost lot of time and got little bit frustrated. :-(
Well that's more or less the timing they promised, if you consider that it takes a couple of days for the shipment from my place (Italy) to the warehouse, 3 to 5 days for them to fix it, and the other couple of days to get it back. I have sent them everything. I am not sure what they are going to do with my wheel. I guess they will try to substitute the possible cause of the issue with a new component.
I will keep you updated but I suggest to you to send the wheel for a check to them. The issue we have is too critical to be lived with. And quite frankly since we are talking high end gears, I guess we all want it to be perfect.
I race in VR and am on the most recent beta 373 for my DD2 on PC. I mainly race in iRacing and I feel some kind of grinding feeling, but I can't tell if it's coming from the DD2 or if it's coming from my motion rig. I feel it in my hands but also by the pedal deck of my sim-lab 80/20 rig.
Is the latest beta known to have any grinding feeling coming from it in iRacing?
Hello, I'm getting P-HUB & P-BME, in the download section of P-BME it had driver 356 & Fanalab 1.24 included. Is it recommended to use driver 373 with Fanalab 1.47 instead? e.g. which one is more stable? Also if I stay with latest official driver v346 & Fanalab v1.12 does P-HUB & P-BME still works? Thanks!
After updating the csl elite PS4 base for PS4 to version 373, on Assetto Corsa Competizione the accelerator pedal no longer vibrates. How can it be? How do you go back to the original version ie v.328? Always if the problem is the beta 373. Thanks
this means an update which will fix the freezing issue on Xbox is coming?
I'm a little confused about what i've to do in my case. I've read so much about supposedly hardware issues with DD´s on the pages before and I don't know if my one got the same.
Play ACC on Xbox One with
DD2 (674, 40)
Universal HUB/Xbox with BME, APM (13)
V2 with APM (35)
Since release of 373 everything worked fine. A few freezes with both wheels occured about the months, but nothing I was worried about.
Don't know what happened, but since a few days there's one freeze after another with the V2. With the HUB was no freezing until now but after gaming a while some misshifts while downshifting occured. Very weird, this never happened before.
Got the DD2 since release in july 2019 and the whole time I was able to carefree gaming.
Looks it like a hardware problem or will a future update specially for Xbox solve this things?
Comments
Hi
I bought a brand new CSW 2.5 and installed the available current driver Fanatec_64-driver_328 from fanatec, and my wheel was shown (2x) as game controller and worked in rfactor2.
But after updating zu Fanatec_64_driver_373, there was a "forced" Hardwareupdate and then it was changed incorrectly?? to FANATEC ClubSport Wheel Base V2 and ist not shown anymore as game controller and not seen or useable in any game.
In hardware and printer i see FANATEC ClubSport Wheel Base V2 but i can nothing do with it.
installed and deinstalled quite and reboot after reebot a lot no success :-(
Any other ideas?
Thanks for helping me 😶
i use a Universal hub, may be This is the reason for changing to Xbox Mode after flashing and loosing windows compatibility. Seems that i have to Find out how to reactivate the „pc Mode“.
will give it a try...
Didnt expect That. Lost lot of time and got little bit frustrated. :-(
Hi Francesco,
Indeed we are.
10 days is that how long Fanatec's support told you it would take to fix the wheel ?
Did you send back both the V2 and your DD1 ?
I would be interested in knowing whether it is actually a repair or if they just replace it with a new unit in the end.
I hope they fix it for you.
Best,
The button combination is in the Quick Guide of the wheel but you can also remove the wheel and re-attach it, then its also back in PC Mode.
Hi Stephane,
Well that's more or less the timing they promised, if you consider that it takes a couple of days for the shipment from my place (Italy) to the warehouse, 3 to 5 days for them to fix it, and the other couple of days to get it back. I have sent them everything. I am not sure what they are going to do with my wheel. I guess they will try to substitute the possible cause of the issue with a new component.
I will keep you updated but I suggest to you to send the wheel for a check to them. The issue we have is too critical to be lived with. And quite frankly since we are talking high end gears, I guess we all want it to be perfect.
Have a good day.
Thanks Marcel,
switching to pc Mode, solved my problem, now every works Fine.
great
Friends,
I have not found the serial number of my DD1 to open the RMA (see attached photo). It is not attached to the bottom like other products.
How do I retrieve this number? Can I get through the software?
Take off the top plage as mentioned in the manual.
Well hidden :)
Thank you Maurice!
Hi guys!
I race in VR and am on the most recent beta 373 for my DD2 on PC. I mainly race in iRacing and I feel some kind of grinding feeling, but I can't tell if it's coming from the DD2 or if it's coming from my motion rig. I feel it in my hands but also by the pedal deck of my sim-lab 80/20 rig.
Is the latest beta known to have any grinding feeling coming from it in iRacing?
Really great job. Thanx
Hey Francesco,
wish good luck with that RMA process. I haven't sent my wheel back yet, let me know if that solves the issue for you.
Please keep us posted.
Thanks!
Sorry Stephane,
I haven't seen your comment before, so sorry about not replying.
Sometimes it takes a lot of time before it freezes, sometimes it's 5 mins into the race.
It has happened to me with the V2 and also with the Porsche.
Let's see if the RMA solves it for Francesco...
Good luck!
I surely will.
Hello, I'm getting P-HUB & P-BME, in the download section of P-BME it had driver 356 & Fanalab 1.24 included. Is it recommended to use driver 373 with Fanalab 1.47 instead? e.g. which one is more stable? Also if I stay with latest official driver v346 & Fanalab v1.12 does P-HUB & P-BME still works? Thanks!
No the latest stable isnt working.
373 is much more stable than 356 so better to use it.
Hi Maurice,
I updated my new PS4 F1 podium to v373 and followed the motor calibration procedure. All works fine.
I do the Wheel center calibration perfectly for the session. But after shutdown/restart the center position is lost (the wheel stay in +15 or +20)
Is there anything to do ?
Thanks
It's fine that the wheel is off center after boot as long as the physical center position is 0
Thanks for your answer.
Update seems to have worked well and switch off clunk almost gone.
Anyway, a mod - can we have an edit function for the 5 sets in the Tuning menu and Fanalab with free text - eg for name of game or Mrs S' settings??
You can Name your profiles in Fanalab. It's not planned to add a function to rename the SET IDs, they stay at 1-5.
Hi buddy,
Did you manage to get this thing working?
I am still trying to troubleshoot mine with support.
Have you test the MPS mode to change in wheel ?
After updating the csl elite PS4 base for PS4 to version 373, on Assetto Corsa Competizione the accelerator pedal no longer vibrates. How can it be? How do you go back to the original version ie v.328? Always if the problem is the beta 373. Thanks
you must uninstall the driver 373 reboot,and than install 328 ,dont forget to downgrade firmware !
Ok Thank you
Sorry for my ignorance, but how do I uninstall version 373. I'm sorry I'm not an expert on this. Thank you
The problem is solved. Thanks anyway.
👍️
Hi,
this means an update which will fix the freezing issue on Xbox is coming?
I'm a little confused about what i've to do in my case. I've read so much about supposedly hardware issues with DD´s on the pages before and I don't know if my one got the same.
Play ACC on Xbox One with
DD2 (674, 40)
Universal HUB/Xbox with BME, APM (13)
V2 with APM (35)
Since release of 373 everything worked fine. A few freezes with both wheels occured about the months, but nothing I was worried about.
Don't know what happened, but since a few days there's one freeze after another with the V2. With the HUB was no freezing until now but after gaming a while some misshifts while downshifting occured. Very weird, this never happened before.
Got the DD2 since release in july 2019 and the whole time I was able to carefree gaming.
Looks it like a hardware problem or will a future update specially for Xbox solve this things?
Regards